8. Settings
It has the function about the Bluetooth lock function setting, lock information setting.
Like remote unlocking, auto-off time, lock sound, time proofread, record reading, etc.
8.1. Function Definition
Master PIN Code
Required for programming and adjusting settings. The Master PIN Code can be used
to unlock the deadbolt in away mode and privacy mode. The default Master PIN code
must be changed before programming. The owner / manager should keep this
information confidential.
Auto Lock
The unit will automatically lock after it has been unlock. This function is disabled
by default. The time delay can be set from 1 to 180 seconds.
Wrong Code Entry Limit
After 10 unsuccessful attempts to enter a PIN code, the keypad will shut down and
be unusable for 3 minutes.
The sounds can be muted when pressing keypad. However, you will still hear low battery
warnings and system alerts.
Silent mode
This is a safety feature when you leave your house for a vacation or long trip. Away mode
disables all user codes until the Master Pin Code is entered on the keypad. When the lock
is unlocked by the thumb turn, an alarm will sound for 1 minute, by entering the Master PIN
Code on the keypad you can disable to alarm and away mode.
Away mode
Push and hold the privacy button on the inside escutcheon for 3 seconds to activate privacy
mode. This will disable all user PIN code access. Privacy mode will be disabled automatically
after unlocking the door with the thumb turn or master code.
Privacy mode
When the batteries are running low, the battery indicator will flash and a voice will announce
Low Battery. Please replace batteries as soon as possible āReplace the low batteriesā with
four new AA alkaline batteries.
Low battery alarm
Generated by TTLock APP, this PIN code can only be used once.
One Time User Code
EN - 13 support@tmezon.comEN - 14 support@tmezon.com
To Next Page
Loading...