蓝牙名称
Tnicer-T5
Pairing Operation
Bluetooth pairing with cell phone
1）
Turn on Bluetooth: In the power-on state, press and hold the [multi-function
button] for 5 seconds, until the red and blue lights flash alternately.At this time
device has entered the Bluetooth waiting to connect state. If you have connected
to other cell phones, the blue light will flash slowly.Please reset and turn on the
device again.
2）
Search cell phone Bluetooth: In the state of red and blue lights alternately
flashing, open the cell phone Bluetooth settings, search for nearby Bluetooth
devices, select "Tnicer-T5" for connection pairing, after successful connection
there will be a voice prompt "device has been connected", then the Bluetooth
pairing success.
Attention：
1.If you have connected to other phones, the blue light will flash slowly, please
reset and turn on the device again.
2. Search for cell phone Bluetooth, select "Tnicer-T5" connection pairing, click to
connect.When the pairing is successful, it will be accompanied by the voice
prompt "device is connected", and the Bluetooth connection is successful. If
the connection fails, you can clear the memory of Bluetooth and search for the
connection again.
Bluetooth Name
Tnicer-T5
Settings
Bluetooth Search
About 5 sec
To Next Page
Loading...
