Toa A-2060 CE - Specifications

Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
URL: https://www.toa.jp/
133-02-00594-00
12. SPECIFICATIONS
Model No. A-2030
CE, CE-GB
A-2060
CE, CE-GB
A-2120
CE, CE-GB
A-2240
CE, CE-GB
Power Source 220 – 240 V AC or 24 V DC
Rated Output 30 W 60 W 120 W 240 W
Power Consumption
(EN60065)
34 W 72 W 124 W 238 W
Power Consumption
(DC operation at rated
output)
2 A 4 A 8 A 15 A
Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 1% or less at 1 kHz, 1/3 rated power
Input MIC 1 –60 dB*, 600 Ω, balanced, DIN type (5 pins)
MIC 2, 3 –60 dB*, 600 Ω, balanced, phone jack
AUX 1, 2 –20 dB*, 10 kΩ, unbalanced, RCA pin jack
Mute Contact pin 4 – 5 closure input (for MIC 1)
Output Speaker Out Balanced (oating), M3.5 screw terminal, distance between barriers: 8.3 mm
(0.33")
100 V 330 Ω 170 Ω 83 Ω 42 Ω
70 V 170 Ω 83 Ω 42 Ω 21 Ω
4 Ω 11 V 15.5 V 22 V 31 V
Rec out 0 dB*, 600 Ω, unbalanced, RCA pin jack
Phantom Power DC +21 V (MIC 1)
S/N Ratio 60 dB or more
Tone Control Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
Muting MIC 1 overrides other input signals with 0 – 30 dB attenuation by mute terminal
contact in MIC 1 DIN type connector.
Ventilation – – – Fan cooling
Finish Panel: ABS resin, black
Case: Steel plate, black
Dimensions 420 (w) x 100.9 (h) x 280.3 (d) mm
(16.54" x 3.97" x 11.04")
420 (w) x 100.9 (h) x 360.3 (d) mm
(16.54" x 3.97" x 14.19")
Weight 5 kg (11.05 lb) 7 kg (15.43 lb) 10.8 kg (23.81 lb) 13.2 kg (29.1 lb)
* 0 dB = 1 V
Notes
• CE and CE-GB are the identically same specications, but only power supply cord is different.
• The design and specications are subject to change without notice for improvement.