Toa AC-M1 User Manual

ELECTRONIC
CONTROL UNIT
OPERATING INSTRUCTIONS
AC-M1
CONNECTING PRECAUTIONS
Be sure to provide a power amplifier, 300W or more output to use in connection
with this unit.
Use of less than 300W power amplifier with not maintain primary capabilities and will
lead to failures of the connecting speakers.
The AC-M1 control unit is designed for use exclusively with the SR-M1 and SR-M2
floor monitor speaker systems. Do not use other speakers than the SR-M1 and
SR-M2.
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend you to keep this manual handy for future reference.
TOA Corporation

Toa AC-M1 Specifications

General

Brand	Toa
Model	AC-M1
Category	Control Unit
Language	English

Summary

CONNECTING PRECAUTIONS

User care

General description

Features

Panel facilities

[Front view]

Details the front panel controls and indicators of the AC-M1 unit, including input level, mode switch, and power button.

[Rear view]

Connection

Basic block diagram

Illustrates the signal flow and component connections within the AC-M1 unit and to external equipment.

Back wiring connection of with external equipment

Provides a visual guide for physically connecting the AC-M1 to power amplifiers and mixers/preamplifiers.

Installation

FC (Floor Correction) switch

Explains the function of the FC switch for correcting frequency response when speakers are placed on the floor.

Block diagram

Specifications

Appearance