12. Input level select switches
Use these switches to adjust input gain of Line1,
Line 2 and Line 3, respectively. (*0dB=1V)
13. Line 2 input terminal
10K Ohms, unbalanced, 3.5mm mini Phone
Jack. Connect a sound source equipment such
as a CD player.
14. Line 3 input terminals
10K Ohms, unbalanced, RCA jack. Connect a
sound source equipment such as a CD player
15. Remote volume control
10K Ohms, removable terminal block (2P). Use it
as a remote volume control.
16. Mono/Stereo switch
Move the switch downwards to set the channels
in stereo mode; move upwards to set the
channels in mono mode.
17. Bridge ON/OFF switch
Move the switch downwards to set the amplifier
in two channels output; move upwards to set the
amplifier in bridging (BTL) mode.
To Next Page
Loading...
