2.Use the suction cup mount to install the CE18A dash cam on
the windshield. The recommended place is near the rearview
mirror facing front, adjust the lens angle for best coverage.
1. Before installation, please check the camera's normal function,
and make sure you are using a high speed Micro SD card
(speed Class 10 or above),and format the card in the camera
menu before recording.
3. Adjust the lens angle of the camera, make sure you get the
best coverage over the hood and the road ahead, so you can
record what happens.
4. Connect the power to the camera and the cigarette lighter,
hide the rest of the cable in the gap of the interior trim board.
Set up and Installation:
3
To Next Page
