EasyManua.ls Logo

TOHATSU 2.5 User Manual

TOHATSU 2.5
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TOHATSU
OUTBOARDS
I 5
I
-
No.00311045-3
Question and Answer IconNeed help?

Do you have a question about the TOHATSU 2.5 and is the answer not in the manual?

TOHATSU 2.5 Specifications

General IconGeneral
Engine Type4-stroke
Horsepower2.5 hp
Cylinders1
Starting SystemManual
Fuel TypeUnleaded Gasoline (87 Octane)
Fuel Tank Capacity1.0 L (0.26 US gal.) Built-in
Weight18.4 kg (41 lbs.)
Shaft Length15 in (Short)
Bore x Stroke55 mm x 36 mm

Summary

Specifications

Names of Parts

Installing the Outboard

Position

Details on outboard placement on the transom board.

Transom Height

Guide for setting outboard height relative to the boat's bottom line.

Transom Matching

Ensuring the anti-cavitation plate is below water at full throttle.

Securing the Outboard

Instructions for tightening clamp screws and using safety rope.

Adjustment of Outboard Angle

How to adjust outboard angle for optimal trim and performance.

Fuel and Engine Oil

Required Types

Specifies the type of gasoline and engine oil recommended for the outboard.

Operation

Break-In

Procedure and guidelines for the initial engine break-in period.

Starting

Step-by-step guide for starting the outboard engine.

Starting if Recoil Starter is Out of Order

Alternative method for starting the engine when the recoil starter fails.

Warm-Up

Procedure for warming up the engine before operating the boat.

Shifting to Forward

How to engage the forward gear on the outboard motor.

Reversing

Instructions for operating the outboard in reverse.

Speed Control

How to control the boat's speed using the throttle lever.

Running in Shallow Water

Precautions and techniques for operating in shallow water.

Stopping

Procedure for safely stopping the outboard engine.

Mooring the Boat

Guidelines for mooring the boat, including tilting the motor.

Removing and Carrying the Outboard

Steps for safely removing and transporting the outboard motor.

Precautions during Operation

Important safety checks and actions during operation.

Adjusting the Steering Resistance

Inspection and Maintenance

Care of your outboard motor

General advice on maintaining the outboard motor's condition.

Daily Inspection

Checks to perform before and after each use for safe boating.

Washing with fresh water

Procedure for cleaning the outboard after use in salt or polluted water.

Precautions in cold weather

Steps to take to prevent freezing damage in cold weather.

Replacing the propeller and shear pin

Instructions for removing and replacing propeller and shear pin.

Replacing the spark plug

Guide on how to inspect and replace the spark plug.

Periodic Inspection

Scheduled maintenance checks for the outboard motor.

Replacing the anode

Procedure for replacing the sacrificial anode to prevent corrosion.

Changing the gear oil

Steps for draining and refilling the gear oil.

Preparing the Outboard for a Long-Term Storage

Instructions for preparing the outboard for extended storage.

Inspection After a Long-Term Storage

Checks to perform before using the outboard after storage.

If the Engine is Submerged in Water

Emergency measures for an outboard engine submerged in water.

Troubleshooting

Tool Kit and Spare Parts

Accessories

Wiring Diagram

Related product manuals