To Next Page
H
heathercooperAug 12, 2025
Why is my TOHATSU M40D2 EPO Outboard Motor overheating?
- HHerbert HendricksAug 12, 2025
If your TOHATSU Outboard Motor engine is overheating, the issue might be propeller cavitation.
Why is my TOHATSU M40D2 EPO Outboard Motor overheating?
If your TOHATSU Outboard Motor engine is overheating, the issue might be propeller cavitation.
Why can't I get high engine speeds on my TOHATSU M40D2 EPO Outboard Motor?
If you cannot obtain high engine speeds on your TOHATSU Outboard Motor, a faulty thermostat could be the reason.
What causes the power trim & tilt to stop working on a TOHATSU M40D2 EPO Outboard Motor?
If the Power Trim & Tilt on your TOHATSU Outboard Motor is inoperative, check for insufficient battery capacity, loose terminals, or corrosion.
General| Engine Type | 2-Stroke |
|---|---|
| Gear Ratio | 2.08:1 |
| Cylinders | 2 |
| Power Output | 40 HP |
| Starting System | Manual |
| Fuel Type | Gasoline |
| Full Throttle Operating Range | 5, 000 - 6, 000 rpm |
| Steering | Tiller |
| Shaft Length | 20 in (508 mm) |
