7-13
4st 4/5/6 2011
7
6. Install reverse lock arm q on the swivel shaft.
ww
7. Check operation of each part, and put grease through
swivel shaft grease nipple w.
Keep putting grease until excessive grease
appears from thrust bushing.
00
Attach wing nut 0, and check operation of
steering friction.
5. Install drive shaft housing and swivel bracket (B) to swivel
bracket.
OBM
MFS4-5-6Ech07110422.qxd 11.4.22 5:55 PM ページ13