MF type
Engine is equipped with a compression
release mechanism.
⑧
Pull the starter handle slowly until
you feel engagement, keep pulling
till you feel less resistance. Then pull
it quickly.
Repeat if necessary until started.
⑨
When starting the engine, push the
choke knob back.
EF, EFT type
⑧
Push the starter switch button.
⑨
Release the button when the
engine has started.
⑩
When starting the engine, push the
choke knob back.
EP, EPT type
⑤
Insert the main switch key.
⑥
Set the control lever in the Neutral
position.
⑦
Raise the free accel lever a little
(both of cold engine and warm
engine).
⑧
Turn the main switch key to START
position. Then, continuously push
the key to operate the choke.
⑨
Stop pushing the key when the
engine has started.
The key returns to the original
position, automatically.
⑩
Returns the Free accel lever to
close position.
25
1
2
3
4
5
6
7
8
9
10
11
12
13
ENGINE OPERATION