Tohnichi ATG - Page 8


7. 置針の使用方法 7.
How to use memory pointer
側面の置針の場合






正面の置針の場合




 
  

● Memory pointer on the side.
For clockwise measurement move the
red marked side of the memory pointer
to the zero point of graduation. For
counter-clockwise move the green
marked side of the memory pointer to
the zero point of the graduation.
● Memory pointer on dial face (as option):
Turn the knob to move the memory
pointer so that it rests against either
the right side of the main hand for
clockwise measurement or to the left
side for counter-clockwise measurement.
※ Side memory pointer is standard
equipment, except for ATG045CN,
45ATGZ and ATG06Z.
“-S” models are with a memory pointer
on dial free.
8. オプション品 8.
Option
● ATG チャック部分は、金属と樹脂が
あります。
● Plastic Chuck for ATG models is optional.
ケース
Case
チャック
Chuck
部品番号
Parts No.
ケース
Case
チャック
Chuck
備考
Remarks
322 樹脂 Plastic 樹脂 Plastic －

  

Both of Case and Chuck are made from metal for the present (September 2005).