Tohnichi CEM100N3X15D-G User Manual

OPERATING INSTRUCTION
To use this product properly and safely, please read this manual carefully before use. If you have
any question about the product and its operations, please contact your nearest distributor or
TOHNICHI MFG. CO., LTD.
MODEL CEM3-G
CEM3-G
CEM3-G Model
CEM100N3X15D-G
CEM3-G取扱説明書.indd1CEM3-G取扱説明書.indd1 2016/07/1411:24:402016/07/1411:24:40

Tohnichi CEM100N3X15D-G Specifications

General

Torque Range (N·m)	20-100
Torque Range (kgf·cm)	200-1000
Minimum Graduation (N·m)	0.5
Minimum Graduation (kgf·cm)	5
Drive Square (inch)	3/8

Summary

Operating Instruction

Safety Precautions

Safety Symbols and Signal Words

Explains safety symbols and signal words used in the manual.

General Warnings

Lists critical warnings regarding charger, battery, and workplace conditions.

Workplace Safety and Product Handling

Covers workplace conditions, accessories, battery handling, and product modification.

Safe Operation and Maintenance

Details safe product use, handling of cables, posture, and inspection for damage.

Understanding Operating Modes

Basic Usage Guide

Functional Explanations

Power Management and Alarms

Operation Examples

Inspection Mode (Without OK/NG Judgement)

Shows how to perform measurements without OK/NG judgment.

Inspection Mode (With OK/NG Judgement)

Tightening Mode Measurement

Outputting Data to PC or Printer

Device Settings and Configuration

Measurement and Limit Settings

Operational and Communication Settings

Memory, Display, and Default Settings

Data Transfer and Battery

Charging and Error Handling

Technical Specifications