To Next PageTo Next Page
Need help?Do you have a question about the Tohnichi DATA TORK CEM3-G and is the answer not in the manual?
General| Model | CEM3-G |
|---|---|
| Display | LCD |
| Weight | Varies by model |
| Head Type | Interchangeable |
| Communication | USB |
| Power Source | Rechargeable Battery |
| Accuracy | ±1% |
Explains safety symbols and signal word classifications for risk levels.
Covers warnings on charger, battery, workplace, and product modification.
Warnings for workplace conditions, accessories, battery disposal, and modification.
Cautions on workplace cleanliness, child safety, and proper storage.
Warnings on product capacity, posture, and cable handling.
Guidance on product care, cable checks, and damage inspection.
Key notes on charger, battery, environment, disassembly, and dropping.
Tips for accurate measurement and proper connection.
Purpose of the CEM3-G digital torque wrench.
Highlights of the product's capabilities and design.
Identifies key parts like heads, display, buttons, and terminals.
Detailed explanation of each component's function.
Explains memory (M-3/M-2) and display (Dual/LCD) modes.
Details measurement (MODE-M/T) and data sampling (Run/Peak) modes.
How to use auto zero function and interpret error messages.
Explains auto memory, judgment, and mute functions.
Covers power saving, auto-off, battery indication, and over torque alarm.
Step-by-step example for torque measurement without OK/NG criteria.
Example of torque measurement with judgment based on set limits.
Example of tightening operation with range alarms.
How to navigate and view stored measurement data.
Calculating data quantity, max, min, and average values.
Procedures for outputting data to external devices.
Steps for deleting single data entries or data ranges.
Details PC output formats and communication settings.
Details printer output formats for various data types.
Setting measurement modes and torque units.
Configuration of upper and lower measurement limits.
Setting tightening direction, auto memory, buzzer, and communication modes.
Configuring baud rate, memory mode, and display modes.
Options for resetting settings to default or retaining them.
How to view and set the device's internal clock.
Final steps for setting the date and completing configuration.
Steps for setting up PC and device for USB data transfer.
Information on battery lifespan and installation.
Important safety warnings during charging.
Troubleshooting common error messages encountered during charging.
Lists battery pack, charger, interchangeable heads, and cords.
Lists data file systems, printers, and data receivers.
Compares options between CEM3-G and CEM2 models.
Detailed torque ranges in various units.
Specifications for product dimensions and weight.
Specifications for torque accuracy, display, and data memory.
Details basic functions, communication, power, and operating conditions.
