Tohnichi DATA TORK CEM3-G User Manual

20
 DIGITAL TORQUE WRENCH “DATA TORK” MODEL CEM3-G
(8) Data clearance
Delete the measured data.
DUAL MODE LCD MODE
N·m
52.0
10 : 30
200
N·m
200
52.0
(Delete 1 data)
Select the data to delete and push
N·m
0.0
10 : 30
200
N·m
200
0.0
Data clearance complete
N·m
52.0
10 : 30
200
N·m
200
52.0
(Delete range of data)
Set the upper end of data
N·m
1
200
STT
N·m
200
STT 1
Set the lower end of data
N·m
200
200
N
N·m
n
200
N·m
0.0
09 : 30
001
N·m
001
0.0
Data clearance complete
1) Delete 1 data
1. Use key to select the data
to delete.
2. Push C key to delete.
2) Delete the selected range of data
1. Use key to set to counter
to the upper end of data to
delete and push .
2. Use key to set the
counter to the lower end of data
to delete and push .
Note) In M-2 mode, lower end can
only be set to 1 (STT1).
3. Push key and key at the
same time, then the screen
shows "CLEAR" and blinks. It
returns to the original display
and deletion is complete.
It shows the number of data to delete. Push and at the same time
Note) Data clearance ( key + key) is effective when the screen shows either “N” (number
of data), “MAX” (maximum value), “MIN” (minimum value) or “AVE” (average value).
CEM3-G取扱説明書.indd21CEM3-G取扱説明書.indd21 2016/07/1411:25:092016/07/1411:25:09

Tohnichi DATA TORK CEM3-G Specifications

General

Brand	Tohnichi
Model	DATA TORK CEM3-G
Category	Power Tool
Language	English