Tohnichi DATA TORK CEM3-G User Manual

16
 DIGITAL TORQUE WRENCH “DATA TORK” MODEL CEM3-G
(4) Checking the measured data
To check the measured data, use key to move the counter where you wish to see the
data.
: Send the counter forward
: Send the counter backward
(Keep it pushed to fast-forward)
DUAL MODE LCD MODE
N·m
0.0
10 : 30
201
N·m
201
0.0
N·m
98.0
200
10:29:50
N·m
200
98.0
Set the counter to 002
Counter Mesured time
N·m
98.0
10 : 30
200
After 1 sec
In dual mode, LCD display shows
the measured time for 1 second
before it turns to the counter. In
LCD display mode, measured time
will not be shown.
Example) To check the data on
counter 200.
Use key till the
counter shows 200.
Counter Counter
CEM3-G取扱説明書.indd17CEM3-G取扱説明書.indd17 2016/07/1411:25:032016/07/1411:25:03

Tohnichi DATA TORK CEM3-G Specifications

General

Brand	Tohnichi
Model	DATA TORK CEM3-G
Category	Power Tool
Language	English