Tohnichi DATA TORK CEM3-G - System Settings and Configuration; Setting Measurement Modes and Units; Configuring Upper and Lower Limits

21
DIGITAL TORQUE WRENCH “DATA TORK” MODEL CEM3-G
External output format
(1) PC output form
Communication spec. RS232C compliant
Synchronous method Start-stop synchronization
Baud Rate Select from 2400, 4800, 9600, 19200 bps
Data Length
7bit (PC Output)
8bit (USB Serial Output)
Stop Bit 1bit
Parity None
• M-3 Mode
RE,999,100.0,05/10/30,12:45:10
R F
Delimiter
Header Counter (3 fig) Torque (decimal point) S:M:TD/M/Y
• M-2 Mode
RE , 99 , 100 . 0 CR LF
(2) Printer output format (Exclusive printer
• M-3 Mode • M-2 Mode
EPP16M3)
CEM3-G取扱説明書.indd22CEM3-G取扱説明書.indd22 2016/07/1411:25:102016/07/1411:25:10