Tohnichi DATA TORK CEM3-G User Manual

10
 DIGITAL TORQUE WRENCH “DATA TORK” MODEL CEM3-G
6
Usage (Delivery condition from Tohnichi)
N·m
0.0
LED
09 : 30
000
This chapter explains simple usage on Tohnichi delivery condition (Dual display mode).
(1) Install attached interchangeable head QH and socket (options).
(2) Push power button.
Do not apply force to the socket at this time.
(3) Display shows as left.
The counter is 000 (RUN mode).
As you apply torque, torque value on LED increases
and returns to zero as you release torque.
(4) Push once and counter turns to 001.
Now it is in PEAK mode.
As you apply torque, the peak value will be kept on
the LED display.
(5) Push once and sounds "Pl".
Measured value 100N.m on display is saved as 001
measurement.
(6) Check 001 measured value.
Push once, LCD display shows counter 001 at
upper left corner and measured time 09:30:01 in
center for 1 second before it returns to normal display.
(7) To delete data, use to select the data to delete,
and push to delete.
N·m
0.0
09 : 30
001
N·m
100.0
09 : 30
001
N·m
0.0
09 : 30
002
N·m
100.0
001
09:30:01
N·m
100.0
09 : 30
001
N·m
0.0
09 : 30
0014
LCD
CEM3-G取扱説明書.indd11CEM3-G取扱説明書.indd11 2016/07/1411:24:572016/07/1411:24:57

Tohnichi DATA TORK CEM3-G Specifications

General

Brand	Tohnichi
Model	DATA TORK CEM3-G
Category	Power Tool
Language	English