1
DIGITAL TORQUE WRENCH “DATA TORK” MODEL CEM3-G
To the user
Read these operating instructions carefully before use. For any questions, contact a Tohnichi
authorized distributor or Tohnichi office. Keep these instructions for future use.
Cautions on Safety
(1) Use only the official Tohnichi charger and battery.
Do not use any other chargers or batteries not designated in this manual.
(2) Charge in the appropriate manner.
Use this charger only to the rated power source.
• Doing otherwise may cause abnormal generation of heat, which may result in fire.
Do not charge the battery in conditions outside of the 0-40 degree Celsius temperature range.
• Doing so may cause them to burst and cause a fire.
Do not wrap the charger or battery with a cloth,etc.
• Doing so may cause them to burst and cause a fire.
When it is not in use, remove the plug from the power source.
• Doing otherwise may cause an electric shock or a fire.
Warnings
Safety symbol
This symbol indicates attention is required for your safety. When this symbol appears in
these instructions, pay particular attention for your safety concerns. Take preventative
measures according to the written message for appropriate operation and management.
Signal Words
A signal word accompanies the safety symbol, which indicates the level of cautions on safety of
people and the appropriate use of the equipment. Signal words are classified into 3 levels:
"danger", "warning " and "cautions" by the degree of risk.
Danger: Imminent danger which may cause serious damage.
Warnings: Potential danger which may cause serious damage.
Cautions: Potential danger which may hinder ordinary operation but may not lead to
serious damage.
CEM3-G取扱説明書.indd2CEM3-G取扱説明書.indd2 2016/07/1411:24:412016/07/1411:24:41
To Next Page
Loading...
Need help?
General
