Tohnichi STC200CN2-G User Manual

DigitalTorqueScrewdriver
ModelSTC2-G
STC200CN2-G
※Bitsaresoldseparately.
※Commerciallyavailablehexagonalbits
witha6.35mmwidthacrossflatscanbeused.
To customers:
Before using this product, please read this operating instruction carefully
to use it properly.
If you have any question, please contact your nearest distributor or
TOHNICHI MFG. CO., LTD.
This operating instruction should be stored in a safe place.

Tohnichi STC200CN2-G Specifications

General

Brand	Tohnichi
Model	STC200CN2-G
Category	Power Screwdriver
Language	English

Summary

Setting Mode Configuration

Setting the Unit

Procedure to set the measurement unit (e.g., cNm).

Setting the Measurement Mode

Procedure to select between Inspection and Tightening modes.

Setting the Upper Limit

Procedure to set the upper torque limit for measurement.

Setting the Lower Limit

Procedure to set the lower torque limit for measurement.

Device Usage and Operation

Inspection Mode (M1)

Tightening Mode (M2)

Calculation and Data Functions

Calculation Function

Calculates data volume, max, min, and average values within a specified range.

Data Output and Memory Management

Measurement Data Output

Procedures for externally outputting measurement data in a collective manner.

Measurement Data Memory Clear

External Output and Charging

External Output Specifications

Details USB interface, serial communication parameters, and output format.

Charging Methods

Error Displays and Reset Operation

Error Displays and Corrective Actions

Lists common error codes, their descriptions, and corrective actions.

Reset Operation Procedure