17
⑩
SV Limiter Low
Set Number of SV Limiter Low.
Setting range: Setting range low～
（
－５０）℃/
⑪
SV Limiter
High
Set Number of SV Limiter High.
Setting range: (
+５０)℃/
～Setting range high
Initial value is different by input.
Refer to
TABLE”.
Select the start SV at the starting of
the run.
SV start
PV start
⑫
Start SV
selection
⑬
Starting
temperature
Set the temperature value of SV
start
Setting Range:
～
or
Displays when
is
.
Select operations for power input.
Reset and start
Operation at power
⑭
Power ON
operation
selection
Select Event output functions
1 and 2.
Release function
PV event output
Time signal
End signal
Loop abnormal event
⑮
Event 1, 2
functions
Displays with options of Event
output 1, 2.
Select Process value for event
output functions 1 and 2.
□
＊※
Displays when
□ is
.
＊
FUNCTIONS(select with ▼ key) ※
ADDITIONAL FUNCTIONS
Release functions
(select with ▲ key)
Deviation high/low limit
Release function
Deviation high limit
Event output hold
Deviation low limit
Stand-by sequence
Deviation range for
Abnormal process value
high and low limit
Event output hold +
Absolute value high/low limit
stand-by sequence
Absolute value high limit
Event output hold +
Absolute value low limit
Abnormal process value
Range of absolute value
high and low limits
Stand-by sequence +
Abnormal process value
Event output hold +
Stand-by sequence +
Abnormal process value
⑯
Process value
event output
functions 1,2
⑰
⑱
event output
1 and 2.
High/Low
limit setting
Set the temperature of the process
value event output
Setting range:
-199.9to 999.9℃／
-199 to 999℃／
or
Displays according to the
setting of process value
event output function.
To Next Page
Loading...