1
1. NOTICE/WARNING BEFORE OPERATION
• Confirm the merchandises at hand shows the correct model and optional function.
For confirmation of model name, please refer to [8.
ORDERING INFORMATION
].
• The following symbol marks are used in this Instruction Manual for handling this model safely.
In case of mishandling, serious danger may occur to the
operator such as death, electrocution and a skin burn.
In case of mishandling, it may cause some damage to the
unit or the operator getting slight injury.
CAUTION
・Do not push the keys by sharp points(i.e. Ball-point-
pen, metals) for prevention of its
malfunction.
WARNING
・Make sure the correct wiring connection before turning on electricity.
Miswiring may cause malfunction of the unit and may cause a fire.
・Never remodel the unit for prevention of malfunction of unit and a fire.
• Types of Input(Thermocouple←→R.T.D.) and Output cannot be changed after receiving the unit.
• Check, if all the attachments are at your hand.
• Instruction Manual ·······································1 booklet
• Installation attachment ·································1 piece (TTM-304)
• Fitting metals················································1 set (TTM-305,309)
• Unit seal ·······················································1 seal paper
In case any of the above is missing or found a different included, inform to us accordingly.
• If you have selected an optional communication function and requiring "Instruction Manual of Communication
Function", please ask us to mail it separately.
• Please put this Instruction Manual aside of the operator of unit.
• Copy or Reprint of this manual, wholly or partially, is not allowed.
• The contents of this manual may change without notice in future.
• Please be noted that we shall not be responsible to all of the defaults resulted by using of the unit.
WARNING
CAUTION
To Next Page
Loading...
Need help?
General