To Next PageTo Next Page
Need help?Do you have a question about the TOHO TTM-204 Series and is the answer not in the manual?
General| Brand | TOHO |
|---|---|
| Model | TTM-204 Series |
| Category | Controller |
| Language | English |
Details improvements in PID algorithm for better control and reduced overshoot.
Covers the establishment of input specifications for various sensor types.
Highlights the realized acceleration in sampling time to 200ms.
Details parameter setup using optional cable and free software.
Specifies the various input signal types supported by the controller.
Details the characteristics of the Liquid Crystal Display.
Covers PID algorithm parameters like Proportional band, Integration time, etc.
Lists specifications for Relay contact, SSR-driving, and Open collector outputs.
Specifies the voltage and frequency requirements for power input.
Specifies operational modes like control stop, manual, timer operation.
Lists available control types such as PID, Type B, Type C.
Covers auto-tuning coefficient and sensitivity parameters.
Specifies communication protocols like RS-485 and MODBUS.
Lists the supported communication protocols (TOHO, MODBUS).
Explains how to configure external setpoint (SV) inputs.
Defines the measurement and indication ranges for Thermocouple and RTD.
Illustrates the terminal connections for the TTM-204 model.
Illustrates the terminal connections for the TTM-205 and TTM-209 models.
Illustrates the terminal connections for the TTM-207 model.
Provides explanations for communication, output, CT, PV, DI, and AI terminals.
Provides detailed dimensions for the TTM-204 model including A, B, C, D, L.
Provides detailed dimensions for the TTM-205 model including A, B, C, D, L.
Provides detailed dimensions for the TTM-207 model including A, B, C, D, L.
Provides detailed dimensions for the TTM-209 model including A, B, C, D, L.
Compares PID control performance with new algorithms against old ones.
Shows connection examples for PC communication and loader cable.
Illustrates the process of self-tuning PID control execution.
Details switching between auto and manual control modes.
Explains multi-channel temperature synchronization using RS-485.
Details control of valve opening based on operation amount.
Describes using external signals as controller parameters.
Explains cascade control using two controllers with remote SV.
Details the structure of model numbers and their corresponding options.
Specifies available options for Output 1, 2, 3, 4, 5, 6, and 7.
Lists available option packages for different model series.
Specifies communication methods (RS-485) and power supply options.
