EasyManua.ls Logo

Tojock DVP506 - English; Cetificate Information; Safety Instructions

Tojock DVP506
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
English
1.CETIFICATE INFORMATION
CE conformity
This product satisfies all regulations applicable to the product within the scope of
Council Directives 2014/30 / EU (EMC), 2014/35 / EU (LVD):
Test Rules:
EN55032: 2015
EN55035: 2017
EN60065: 2014
RoHS Compliance Statement.
This product has been designed and manufactured in accordance with Directive
2011/65 / EU of the European Parliament and of the Council on the restriction of the
use of certain dangerous substances in electrical and electronic equipment (RoHS
Directive) and is considered to comply with the concentration values maximums
issued by the European Committee for Technical Adaptation (TAC).
Manufacturer Information
Product: Multi-media Player Model: DVP506
Input: IN100V-240V 50/60Hz 0.048A 11W (Max)
2.SAFETY INSTRUCTIONS
Here are some basic safety precautions that you should carefully follow as you use
your new Maxesla Discs Player. Read all instructions carefully! Maxesla is not
responsible for damage or injuries caused by improper use of the appliance.
1) READ ALL INSTRUCTIONS.
2) Remove any packaging material before using this appliance.
3) Moisture - Do not expose this apparatus water or moisture. To prevent fire or shock
hazard, do not place objects filled with liquids, such as vases, on the Discs player. If liquid
enters the unit, unplug the device immediately. Be sure to install the player in an area
where access to the AC power cord is available so that the unit may be unplugged from
the wall socket immediately in the event of trouble or if liquid is spilled onto the unit.
4) NOTE: If the player is brought directly from a cold to a warm location, or is placed in a
very damp room, moisture may condense on the lenses inside the player and the player
may not operate properly. In this case, remove the disc and leave the player turned on for
about half an hour until the moisture evaporates.
5) Heat - The Discs player should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
6) Proper ventilation - Do not install this player in a confined space, such as a bookshelf
or similar unit unless proper ventilation is provided. Slots and openings in the Discs player