Document Ref 903158-001 Page 7
Component Technical Manual MA26 MP-T1 Meter for Fuel Dispensers
Issue A
1.1.3 TECHNICAL SPECIFICATIONS
Characteristics UNITS VALUE
Displacement : Litre 0.700
Maximum flow-rate : l/mn 83
Minimum flow-rate : l/mn 5
Accuracy within the flow range : % ± 0.3
Maximum service pressure : bar 4
Maximum torque during delivery : Nm 4
Pressure drop without torque : bar 0.08 5 l/mn
0.12 40 l/mn
0.15 50 l/mn
0.26 80 l/mn
Adjusting device operating range : % ± 1.1
Environmental Conditions
Climate : marine, tropical, industrial and polar
Ambient temperature range : - 25°C to + 55°C.
Fuel temperature : - 25°C to + 55°C.
Atmosphere : In accordance with climate.
1.1.4 APPROVALS
Metrological
European Approval : 01.00 . 422.003.0 (21 June 2001)
The MA26 meter is a measurement transducer for use in a measuring instrument
for liquids other than water. As such it is tested and certified according to the
OIML (Organisation International de Metrology Legal) Recommendation R117.
The certificate is issued under number R117(1995)-NL-01.04 by the NMi (Dutch
national test institute).
Safety
The MA26 meter with the MP-T1 pulser is constructed for use in gasoline
dispensers in a zone 1 area. Therefore the pulser, as an electrical part, has been
approved by LCIE according the European Standard EN 50014 and EN 50018
with protection code EExdIIBT6 with certificate number DEMKO
00.E.128709X.
To Next Page
Loading...
Need help?
General
