Need help?Do you have a question about the Tokheim Quantium 110 and is the answer not in the manual?
General| Manufacturer | Tokheim |
|---|---|
| Model | Quantium 110 |
| Display Type | LCD |
| Category | Dispenser |
| Fuels | Gasoline, Diesel, Ethanol |
| Hose Configuration | Single or Double |
| Nozzle Capacity | Standard Nozzle |
| Payment Options | Cash |
| Connectivity | Ethernet |
Outlines essential health, safety, and accident prevention measures for installation.
Mandatory safety checks to be performed during all work activities.
Identifies potential hazards during installation and necessary precautions.
Lists standard warning signs found on dispensers and their meanings.
Specifies required protective clothing and safety equipment for hazardous areas.
Illustrates hazardous area classifications (Zone 1 and Zone 2) for dispenser placement.
Details various hydraulic connection types and methods for dispensers.
Guidelines and warnings for safely lifting and positioning dispensers.
Pre-placement checks and procedures before positioning the dispenser.
Details methods for securely anchoring the dispenser to the ground.
Essential guidelines and recommendations for proper dispenser earthing.
Detailed instructions for making various hydraulic pipework connections.
Specific pipework for suction dispensers with internal filters.
Specific pipework for suction dispensers with external filters.
Instructions for pipework connections for submerged dispenser systems.
Guidance on making safe and compliant electrical connections.
Steps for direct electrical wiring to the WWC terminal rail.
Steps for testing and programming the dispenser before handover.
Procedures for calibrating meters and electronic components.
Steps for performing manual calibration of the dispenser meter.
Guide to calibrating the MPE pulser electronically using UAK.
Final verification of W&M compliance, readings, and serial numbers.
To Next Page
