7. LEAKING TANK QUICK FIX CONTINUED
8. REPLACEMENT PARTS
8.1 For replacement parts and technical questions visit www.tomahawk-power.com or scan
the QR code on the front of this manual.
8.2 Not all equipment components are available for replacement. The illustrations within
this manual are a convenient reference to the location and position of parts in the assembly
sequence.
8.3 When ordering parts, the following will be required: equipment model number, serial
number/lot, date code, and description. The distributor reserves the right to make design
changes and/or improvements to equipment, parts, accessories, and manuals without
notice.
14
4
If the tubing is kinked, loose, or disconnected
from the base of the tank, reattach the tube.
3
Leaking may be caused by the tubing
attached to the strainer.
6
Dry off your fogger throughly and fill the
chemical tank with water to monitor leakage.
5
Fit the tube tightly around the nozzle at the
base of your fogger’s chemical tank.
To Next Page
Loading...
Need help?
General
