Tomahawk TMD14 - Assembly; Fogger Parts Identification; Step-by-Step Assembly Guide

8
3. ASSEMBLY
3.1 Fogger Parts
Remove all parts from the packaging. You will not need all parts for this set up.
Additional Parts
Throttle Handle
Clear Tubes
Fastening Screw
Backpack Straps
Tool Kit
Hose Clamps
3.2 Assembly Guide
Ribbed Tube
Connecting Pipe
Blower Pipe
Fan Nozzle
Optional: Tree Top Nozzle
Optional: Extension Pipe
A B C
D E F
2
Fasten the ribbed tube (A) to the blower
elbow.
1
Remove all parts from the fogger box,
including the tool kit bag.