What to do if Tomahawk Paint Sprayer has normal spark but won't start?
If your Tomahawk Paint Sprayer has a normal spark but isn't working, it could be due to too much fuel in the cylinder, so drain it. Alternatively, there might be water or dirt in the fuel, so replace it.
What to do if Tomahawk Insect Control Equipment stops while running?
If your Tomahawk Insect Control Equipment stops while running, several issues could be the cause. First, check if you're out of fuel and add a 50:1 premix if needed. Inspect the lead wire of the plug for looseness, and replace it if necessary. A carbon-covered spark plug should be replaced. Also, a clogged filter can cause the engine to stop, so clean it. Water in the fuel can also be a culprit, so replace the fuel with a 50:1 premix. Finally, if the engine is bogging down, adjust the carburetor.
Why Tomahawk TMD14 starts but cannot run at high speed?
If your Tomahawk Insect Control Equipment starts but cannot run at high speed, check the choke. Ensure it is in the fully open position. Also, an incorrect fuel ratio could be the problem, so replace the fuel. Finally, water in the fuel can cause this issue, so replace the fuel.
How to improve efficiency of Tomahawk Insect Control Equipment?
If your Tomahawk Insect Control Equipment runs, but its performance is inefficient, start by checking the air filter and clean it if it's dirty. Also, inspect the outlet of the cylinder and muffler for dirt and remove any obstructions. Finally, if the piston, piston ring, or cylinder are worn, they will need to be replaced.
Why is there no dust discharge from my Tomahawk Paint Sprayer?
If there's no dust discharge or the discharge is intermittent in your Tomahawk Paint Sprayer, it could be because the dust gate cannot be opened, so adjust it. The tank lid might not be tight, so tighten it. The dust or granule could be dirty, so clean it. The dust/granule might have lumps, so break the lumps or replace it. Or, the granules might be too big, so use smaller granules.
What to do if the discharge rate is out of control on my Tomahawk Paint Sprayer?
If the discharge rate of your Tomahawk Paint Sprayer is out of control, the dust control lever is not working properly. Adjust the cord or fix the carburetor.
Why does my Tomahawk Paint Sprayer engine lack power?
If the Tomahawk Paint Sprayer engine lacks power, it might be due to several reasons. Check if the filter is clogged and clean it. Ensure that air isn't passing through a loose carburetor connection and tighten it if necessary. If the engine overheats, stop it and allow it to cool. Replace the fuel if there's water in it. Lastly, clean the muffler if it's clogged with dirt.
Why is my Tomahawk Paint Sprayer engine overheating?
If your Tomahawk Paint Sprayer engine overheats, it could be due to several reasons. The fuel mix may have too little gas, so replace the fuel. The cylinder might be dirty, so clean it. The oil could be bad, so replace the fuel with a new 50:1 pre-mix fuel. Also, check the hose connection and adjust it if there's no connection.
What to do if Tomahawk Blower has spark but won't start?
If your Tomahawk Blower has a normal spark but isn't working, there might be too much fuel in the cylinder (drain it), or water or dirt in the fuel (replace the fuel). The cylinder and piston ring could be worn or torn (replace them). Check if the plug is loose (tighten it) or if there's no fuel in the tank (add fuel). A clogged filter gauge (clean it) or a hole in the fuel tank (clean it) could also be the cause.
What to do if my Tomahawk Blower engine stops while running?
If your Tomahawk Blower engine stops while running, consider these possible causes: a loose plug wire (replace it), a broken piston (fix or replace it), a dirty plug or carburetor (clean them), an empty fuel tank (add fuel), clogged hoses to the tank (clean them), or water in the fuel (replace the fuel).
General| Brand | Tomahawk |
|---|---|
| Model | TMD14 |
| Category | Insect Control Equipment |
| Language | English |
Lists benefits of product registration.
Outlines the process for registering the product.
Provides access to video guides for assembly and troubleshooting.
Offers access to operation manuals and spare parts guides.
Details how to submit a service request for assistance.
Explains DANGER, WARNING, CAUTION symbols and their meanings.
Crucial rules for safe operation, including PPE and equipment checks.
Warnings related to fuel handling and engine operation.
Safety measures for cleaning, servicing, and repairing the equipment.
Guidelines for handling chemicals safely, including PPE.
Overview of the fogger's capabilities and intended uses.
Details about the fogger's 2-stroke engine.
Information on available attachments for spraying.
Technical details and performance metrics of the fogger.
Lists all components included for assembly.
Step-by-step instructions for assembling the fogger.
Continues the assembly guide with additional steps.
Instructions for starting the fogger engine.
Details on completing the engine start-up.
Procedures for safely shutting down the fogger.
How to adjust droplet size, water speed, and water flow.
Instructions for adjusting the carburetor for optimal performance.
Detailed steps for adjusting the carburetor using a tool.
Steps to identify and fix leaks in the chemical tank.
Information on how to order and identify replacement parts.
Details of the product warranty and what is not covered.
How to submit a warranty claim and required registration.
A chart outlining maintenance tasks and their frequency.
Common causes and solutions for starting problems.
Troubleshooting guide for operational problems and inefficiency.
Solutions for the engine stopping unexpectedly during operation.
Solutions for issues related to spraying output and pressure.
Guidelines for moving and storing the fogger safely.
Visual diagrams of all fogger components.
Outlines owner's rights and responsibilities regarding emissions warranty.
Details the warranty period for the emissions control system.
Specifies owner's duties for maintaining warranty eligibility.
Specifies conditions and requirements for warranty claims.
Lists components covered under the emissions warranty.
To Next Page
