Tomahawk TMD14 - User Manual

Other manuals for Tomahawk TMD14

Package Contents46 pages

User Manual31 pages

Questions and Answers

J
John MooreSep 2, 2025
What to do if Tomahawk Blower has spark but won't start?
- T
  Tamara FordSep 2, 2025
  If your Tomahawk Blower has a normal spark but isn't working, there might be too much fuel in the cylinder (drain it), or water or dirt in the fuel (replace the fuel). The cylinder and piston ring could be worn or torn (replace them). Check if the plug is loose (tighten it) or if there's no fuel in the tank (add fuel). A clogged filter gauge (clean it) or a hole in the fuel tank (clean it) could also be the cause.
K
Kelly MorrisSep 1, 2025
How to troubleshoot no spark on a Tomahawk Blower?
- S
  Samantha DiazSep 2, 2025
  If your Tomahawk Blower has no spark, the spark plug may be wet (dry it) or dirty (clean it). Also, check for a damaged insulation (replace it), an incorrect spark gap (adjust it), a damaged wire wrap (fix or replace it), bad coil insulation (replace it), or a broken coil wire (replace it).
K
katherinekingSep 1, 2025
What to do if my Tomahawk Blower engine stops while running?
- H
  Holly MerrittSep 1, 2025
  If your Tomahawk Blower engine stops while running, consider these possible causes: a loose plug wire (replace it), a broken piston (fix or replace it), a dirty plug or carburetor (clean them), an empty fuel tank (add fuel), clogged hoses to the tank (clean them), or water in the fuel (replace the fuel).
J
Jeffrey KruegerAug 31, 2025
Why does my Tomahawk Blower engine lack power?
- G
  george57Aug 31, 2025
  If your Tomahawk Blower engine lacks power, several factors could be the cause. The filter might be clogged, requiring cleaning. Air could be passing through a loose carburetor connection, so tighten it. The engine may be overheating; in that case, stop the engine and let it cool. Other potential issues include water or thin gas in the fuel (replace the fuel), a dirty muffler or cylinder (clean them), bad oil (replace the fuel with new 50:1 pre-mix fuel), a disconnected hose (adjust the hose connection), bad fuel (replace the fuel), worn parts (fix or replace them).
R
rhonda99Aug 30, 2025
Why is spraying mist low in Tomahawk Insect Control Equipment?
- R
  Rebecca AriasAug 30, 2025
  If the spraying mist is low on your Tomahawk Insect Control Equipment, the holes of the spraying sheet may be worn, requiring replacement. Alternatively, the spraying parts may be clogged and need cleaning.
R
Renee BriggsAug 29, 2025
What causes low spraying with fine pressure in Tomahawk Insect Control Equipment?
- A
  Aaron Williams PhDAug 29, 2025
  If the pressure is fine but the spraying is low on your Tomahawk Insect Control Equipment, it could be due to several worn components. A worn piston or insufficient piston running distance both require replacement. Also, worn inlet and outlet valves should be replaced. Lastly, check for clogged spraying parts and clean them if necessary.
J
Jennifer MorganAug 28, 2025
Why is there low or no pressure spraying from Tomahawk TMD14?
- D
  Doris LynchAug 28, 2025
  If you're experiencing low or no pressure spraying with your Tomahawk Insect Control Equipment, ensure that the pressure is adequately regulated. If the elastic force regulating spring is insufficient, replace it. A worn corrosion-resistant steel ball should also be replaced. Lastly, a broken turbo boost pump will require replacement.
B
Brittany JonesAug 27, 2025
What to do if liquid does not spray out of Tomahawk TMD14 Insect Control Equipment?
- N
  narnoldAug 27, 2025
  If the liquid does not spray out of your Tomahawk Insect Control Equipment, the inlet and/or outlet valves may be blocked, requiring cleaning or replacement. Additionally, a damaged washer, bearing, or piston could be the cause, each necessitating replacement.
R
Ryan WallaceAug 27, 2025
How to improve efficiency of Tomahawk Insect Control Equipment?
- J
  Julie WeberAug 27, 2025
  If your Tomahawk Insect Control Equipment runs, but its performance is inefficient, start by checking the air filter and clean it if it's dirty. Also, inspect the outlet of the cylinder and muffler for dirt and remove any obstructions. Finally, if the piston, piston ring, or cylinder are worn, they will need to be replaced.
M
Mark PayneAug 25, 2025
Why Tomahawk TMD14 starts but cannot run at high speed?
- B
  barbara83Aug 26, 2025
  If your Tomahawk Insect Control Equipment starts but cannot run at high speed, check the choke. Ensure it is in the fully open position. Also, an incorrect fuel ratio could be the problem, so replace the fuel. Finally, water in the fuel can cause this issue, so replace the fuel.

Tomahawk TMD14 Specifications

General

Brand	Tomahawk
Model	TMD14
Category	Insect Control Equipment
Language	English

Summary

Register Your Equipment

Registration Benefits

Lists benefits of product registration.

How to Register Your Equipment

Outlines the process for registering the product.

Equipment Resources

Video Library Access

Provides access to video guides for assembly and troubleshooting.

Manuals and Guides Library

Offers access to operation manuals and spare parts guides.

Submit a Service Request

Details how to submit a service request for assistance.

Safety Information

Safety Symbols and Definitions

Explains DANGER, WARNING, CAUTION symbols and their meanings.

Operating Safety

General Operating Precautions

Crucial rules for safe operation, including PPE and equipment checks.

Safety While Using Combustion Engines

Fueling and Operation Hazards

Warnings related to fuel handling and engine operation.

Service Safety

Maintenance and Repair Precautions

Safety measures for cleaning, servicing, and repairing the equipment.

Chemical Handling

Safe Chemical Use and Protection

Guidelines for handling chemicals safely, including PPE.

General Information

Design and Features Overview

Overview of the fogger's capabilities and intended uses.

TOMAHAWK Engine Details

Details about the fogger's 2-stroke engine.

Spraying Accessories Information

Information on available attachments for spraying.

Product Specifications

Technical details and performance metrics of the fogger.

Assembly

Fogger Parts Identification

Lists all components included for assembly.

Step-by-Step Assembly Guide

Step-by-step instructions for assembling the fogger.

Assembly Guide: Further Steps

Completing the Assembly Process

Continues the assembly guide with additional steps.

Operation

Engine Start-Up Guide

Instructions for starting the fogger engine.

Operation: Start-Up Completion

Engine Start-Up Procedures

Details on completing the engine start-up.

Engine Stopping Procedures

Procedures for safely shutting down the fogger.

Adding Chemicals

Adjusting Spraying Options

How to adjust droplet size, water speed, and water flow.

Carburetor Adjustment Guide

Carburetor Tuning Steps

Instructions for adjusting the carburetor for optimal performance.

Carburetor Adjustment: Fine-Tuning

Fine-Tuning Carburetor Settings

Detailed steps for adjusting the carburetor using a tool.

Leaking Tank Quick Fix

Troubleshooting Tank Leaks

Steps to identify and fix leaks in the chemical tank.

Replacement Parts

Ordering and Identifying Parts

Information on how to order and identify replacement parts.

Warranty

Warranty Coverage and Exclusions

Details of the product warranty and what is not covered.

Warranty Claims Process

How to submit a warranty claim and required registration.

Maintenance

Recommended Maintenance Schedule

A chart outlining maintenance tasks and their frequency.

Troubleshooting

Fails to Start Issues

Common causes and solutions for starting problems.

Performance Issues

Troubleshooting guide for operational problems and inefficiency.

Engine Stops While Running

Solutions for the engine stopping unexpectedly during operation.

Troubleshooting: Spraying Issues

Spraying Problems

Solutions for issues related to spraying output and pressure.

Transportation & Storage

Safe Transport and Storage Procedures

Guidelines for moving and storing the fogger safely.

Parts Manual

Illustrated Parts Breakdown

Visual diagrams of all fogger components.

Emission Warranty: Rights and Obligations

Warranty Rights and Obligations

Outlines owner's rights and responsibilities regarding emissions warranty.

Manufacturers Warranty Coverage

Details the warranty period for the emissions control system.

Owners Warranty Responsibilities

Specifies owner's duties for maintaining warranty eligibility.

Emission Warranty: Defects Requirements

Defects Warranty Requirements

Specifies conditions and requirements for warranty claims.

Emission Warranty: Parts List

Emission Warranty Parts List

Lists components covered under the emissions warranty.

Related product manuals

Tomahawk Mist Blower

46 pages