What to do if Tomahawk Insect Control Equipment stops while running?
- WWillie PowersAug 25, 2025
If your Tomahawk Insect Control Equipment stops while running, several issues could be the cause. First, check if you're out of fuel and add a 50:1 premix if needed. Inspect the lead wire of the plug for looseness, and replace it if necessary. A carbon-covered spark plug should be replaced. Also, a clogged filter can cause the engine to stop, so clean it. Water in the fuel can also be a culprit, so replace the fuel with a 50:1 premix. Finally, if the engine is bogging down, adjust the carburetor.




