EN | IMPORTANT WARNINGS!
These instructions can also be found at www.tommeetippee.com
Keep this instruction sheet for future reference as it includes
important information.
• Flask can contain boiling water – a potential scalding hazard.
Ensure lids are securely fastened. Open with care. Always use
on a flat surface.
• Handle freshly boiled water carefully.
• Adult use only.
• Please keep out of reach of children.
• Inspect before use. Throw away at first signs of damage or
weakness.
• Do not use to store or carry carbonated drinks.
• Always check food temperature before serving and feeding.
• When making up a feed, follow the formula manufacturer’s instructions.
• Do not use in a microwave oven.
• Do not use with any other liquid than water in the preparation of a
formula feed.
• In order to minimise bacterial growth do not use to keep warm milk
products. Use only as directed in HOW TO USE section.
• Always allow the cooling flask to reset before use and handling
(3-4 hours).
• Handle the cooling flask carefully as the base will heat up when in
use. Leave the cooling flask to cool after steam sterilisation.
• Use the cooling flask in a safe environment, away from baby.
STORAGE
• Do not store in direct sunlight or near a source of heat.
• Do not store with or allow to come into contact with solvents
or harsh chemicals.
• Keep all components not in use out of reach of children.
DO: Press the power
symbol for 3 seconds to
turn on the digital lid.
Lid will automatically
turn o after 12 hours to
reserve battery power.
DO: Turn the cooling
flask upside down and
tap the power symbol to
check the temperature.
Remember the star will
go blue when the feed is
ready. Minimum cooling
time is 2 minutes.
DO: Reset time for the
cooling flask is 3-4 hours
depending on sterilising
and cleaning method.
DON’T: dispense the
feed if the digital lid
shows an orange or
red star.
DON’T: dispense
the feed before
2 minutes.
DON’T: store a
made-up feed
in the flask.
DON’T: panic if you
hear a crackling
sound when making
your feed. This is
the cooling flask
in action.
DON’TDO
Cooling Flask
Shaking the cooling flask starts the cooling process.
✗
✓
To Next Page
Loading...
