The device uses digital electronic gyroscopes and acceleration sensors to control balance
and motion, depending on the user's center of gravity. The device also uses a control system
to drive the motors that are located within the wheels. The device has a built-in inertia
dynamic stabilization system that can help assist with balance when moving forward and
backwards, but not while turning.
TIP - To increase your stability, you should keep your body be balanced in order to overcome
the centrifugal force during turns, especially when entering a turn at higher speeds.
1. Fender
2. Left Foot Mat
3. Status LED Indicator
4. Power/Battery Indicator
5. Right Foot Mat
6. LED Light
7. Power Button (Located in rear)
8. Charge Port (Located in rear)
- 07 - - 08 -
2-2.FEATURES/PARTS 2-3.OPERATING PRINCIPALS
Any V2 Scooter that does not work
properly can cause you to lose control
and fall. Check the entire device
thoroughly before every riding, and
do not ride it until any problems have
been corrected.
To Next Page
Loading...
