The V2 has powerful built-in wireless speakers so you can play your music while riding.
1.Ensure your V2 is turned off. If it is not please turn off your scooter first before pairing.
2.Turn on your V2 and the speakers will annouce that it's waiting for a Bluetooth connection.
This will indicate your V2 speaker is now in pairing mode.
3.Place the V2 and the Bluetooth device to which you would like to pair it within the operating
distance. We recommend keeping the two devices no further than 3 feet apart during pairing.
4.Ensure Bluetooth is enabled on your phone or music device. Refer
to manufacturer instructions for how to enable Bluetooth on your device.
5.Once you have activated Bluetooth on your device, select the option "music" from the list of
available Bluetooth devices.
6.If required, enter the PIN code "000000" and confirm the entry.
7.Please note, pairing mode on the V2 will last for two minutes. If no devices are paired after two
minutes, the V2 speaker will automatically return to standby mode.
8.If pairing is unsuccessful, turn off the V2 first and re-pair following the aforementioned steps.
2-6.BLUETOOTH SPEAKER
- 11 - - 12 -
When the operator triggers the foot mats, the LED Status Indicator will light up, which indicates that V2 is
now ready for use.
When the system has an error during operation, the running LED light will turn red (for more details see
Chapter 5: SAFE RIDING).
· STATUS INDICATOR
· PAIRING THE SPEAKER
Once the V2 speakers are paired to your device, you can stream music wirelessly to them.
Select the track you wish to listen to on your device to listen via the speakers. All volume
and track controls will be made using your music device. Should you encounter any
problems while streaming, please refer to your device's user manual.
NOTE: Once you have paired the V2 speaker with a device, the speaker will remember this
device and will pair automatically when the device's Bluetooth is activated and in range.
You do not need to re-pair any previously connected devices.
Your V2 can pair up to two multi-point devices. You can reconnect a previously paired device without
going through the pairing or PIN process on up to two devices.
· LISTENING TO MUSIC
To Next Page
Loading...
