TomTom GO 6200 User Manual

93
Note: If you want to report a map change of a type not shown in the menu, use the Map Share
Reporter at tomtom.com.
5. Follow the instructions for your chosen type of map change.
6. Select Report.
Your map change report is sent to TomTom in real time.
Note: All map changes are verified by TomTom. These verified changes are then available as
part of the next map update which you can get when your device is connected to the internet
and you are logged into your TomTom account.
Creating a map change report from a marked location
If you see a map inconsistency while you are driving, you can mark the location so you can report
the change later.
Tip: You can mark your current location even when you are driving.
Important: Do not report map changes while you are driving.
1. In the map view or the guidance view, select the current location symbol or the speed panel.
The Quick Menu opens.
2. Select Mark Location.
The marked location is stored in My Places with the date and time you saved the location.
3. In the Main Menu, select My Places.
4. Open the Marked locations folder and select the marked location.

TomTom GO 6200 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Languages support	Multi
Traffic Message Channel (TMC)	-
Map coverage	All Europe
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Pixel density	154 ppi
Display diagonal	6 \
Display resolution	800 x 480 pixels
Storage media type	Flash
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Internal storage capacity	16 GB
Form factor	Fixed
Product color	Black, Grey
Supported radio bands	Not supported
Power source type	Battery, Cigar lighter
Battery life (max)	1 h
Cables included	USB

Weight and Dimensions

Width	- mm
Weight	- g