Tips:
The drone supports two control modes: Mode 1 and 2.
Note:
Mode 1 is the default setting. Please press “Set speed” button and turn
on the remote control to switch to Mode 2. Take Mode 1 for example to
introduce the control method of the drone.
Mode 1: Use the left joystick to make the drone fly up / down, rotate
left / right; use the right joystick to make the drone up / down /
left / right.
Mode 2: Use the left joystick to rotate to the front / rear / left / right; use
the right joystick to make the drone fly up / down / left / right.
Remote Control
03
Left
Joystick
Right
Joystick
Speed
Switch
Headless Mode
Emergency
Stop
One-button
Takeoff /
Landing
Power
Calibrate
360° Rotation
Rotation
WASD
Fine-
tuning
Light On / Off
Orbit Flight