Tone Commander 8610/8620 User Guide 27
“Smart” Pauses
Pauses are entered with the PAUSE softkey, and are shown
in the display as a P character. The first pause in a dial string
will delay dialing until the call is answered; additional pauses
delay dialing for one second. Enter multiple pauses to
increase the delay time.
Press the
DONE key twice to return to the key selection menu
or press the
SETUP key to exit Setup Mode.
Feature Activator Keys
Feature Activator keys must be assigned by your telephone installer.
You can change the call origination feature from the User Options
menu.
The CALL feature is not used with Lucent 5ESS Custom ISDN and
Avaya Definity Custom ISDN.
Select CALL if a call needs to be originated when the feature
is activated. When enabled, (CALL) will appear in the top line
of the display as shown above.
With CALL enabled, the feature is always activated within the
context of a call. Features that need to originate a call include
Call Forward (on Siemens EWSD), ICM intercom (on Nortel
DMS-100), and Call Pickup.
If the phone is on-hook when a Feature Activator key with
CALL enabled is pressed, a new call will be originated. If the
phone is already off-hook when the feature key is pressed, the
feature will be activated within the context of the current call.
Press the
DONE key twice to return to the key selection menu.
10=NETWORK FA#59 (CALL)
CALL
To Next Page
Loading...
