Tool-Temp MP-888 - MP-888 Technical Specifications and Connections; Power and Voltage Specifications; Sensor and Signal Connections; Controller Identification and Version Information

Guidance MP-888 - Supplement to the manual of instructions 4/10
1
Possible supply voltages (factory adjusted)
2
Possible temperature sensor (factory adjusted)
3
Version of the controller
4
Temperature sensor connection
21+23 Temperature sensor – note + / -
22 Pt-100 compensation
5
Flow control – encoder signal
6
Connection external set point
26+28 Analog input 4- 20mA
27+28 Analog input 0 - 10 V
7
Connection actual value - output
29+30 Analog output 0 - 10V
8
Power supply
1 230V AC
2 Neutral
3 PE
9
Flow control (alarm)
10
Temperature monitoring, temperature deviation alarm
11
Cooling (command)
12
Heating (command)