Tool-Temp MP-888 - 1. Overview MP-888; Display Indicators; Control Buttons and Status LEDs

Guidance MP-888 - Supplement to the manual of instructions 3/10
1. Overview MP-888
1
Display of set value
2
Display of actual value
3
Flow control
Display of the current flow in litres/min, English or American gallons/min.
4
Up arrow Raise of set value
5
Down arrow Reduction of set value
6
Program button
7
Flow control
Flow control active LED green
Alarm flow control LED red
8
LED Cooling
Lights up when the cooling relay is activated
9
LED Heating
Lights up when the heating relay is activated
10
LED Sensor failure
Lights up when the sensor is intermitted
11
LED Temperature deviation control
Lights up when the difference between set and actual temperature is too high
12
LED Maximum temperature
Lights up when the maximum temperature has been reached
13
LED External temperature control
Lights up when the set value is applied from extern