Tool-Temp MP-888 - 2. Overview controller programmes; Programs for Temperature Control Units without Flow Control; Programs for Temperature Control Units with Flow Control

Guidance MP-888 - Supplement to the manual of instructions 5/10
2. Overview controller programmes
Once the „US-programs“ are set, the corresponding parameters are adjusted automatically on US-
Gallons per minute and degree Fahrenheit.
Temperature Control Units without flow control
Programme
New models
Old models
P 41
P US 41
TT-180, TT-181
TT-155, TT-156, TT-157 E, TT-162 E,
TT-162H
P 42
P US 42
TT-170 L, TT-100 K-E, TT-100 KB-E
TT-162 E/PHE, TT-162 H/PHE,
TT-162 E/A, TT-162 H/A, TT-154 E,
TT-113 K, TT-103 K FeKo
P 43
P US 43
TT-130, TT-131, TT-132, TT-133,
TT-134, TT-139
P 44
P US 44
TT-220, TT-230, TT-240, TT-245
P 45
P US 45
TT-260, TT-270, TT-280, TT-280/2
P 46
P US 46
TT-360, TT-370, TT-380, TT-380/2,
TT-380 / 48 kW
P 47
P US 47
TT-300, TT-301, TT-302, TT-303,
TT-304, TT-305, TT-500, TT-700
Temperature Control Units with flow control
Programme
New models
Old models
P 72
P US 72
TT-DW160 9kW
P 73
P US 73
TT-1358
P 74
P US 74
TT-1398
TT-148
P 75
P US 75
TT-108 E / 6 - 18 kW / Pt-100
P 76
P US 76
TT-108 K / 18 - 45 kW / Pt-100
P 77
P US 77
TT-1000
P 78
P US 78
TT-137 B/BP, TT-138 B/BP
P 79
P US 79
TT-188, TT-168 E special unit
1,5 – 35 l/min
P 80
P US 80
TT-188, TT-168 E, TT-168 H
P 81
P US 81
TT-168 E/A, TT-168 H/A,
TT-168 E/PHE, TT-168 H/PHE,
TT-168 E/A/PHE, TT-168 H/A/PHE
P 82
P US 82
TT-118 K, TT-1038 K, TT-108 K FeKo
P 83
P US 83
TT-1548 E
P 84
P US 84
TT-137 N-B, TT-138 N-B,
TT-142 N-B, TT-142 B/BP
TT-143
P 85
P US 85
TT-288, TT-288/2
P 86
P US 86
TT-1368
P 87
P US 87
TT-388, TT-388/2, TT-390, TT-390/2