Empty the grass debris from the hybrid collection box, and
refit it.
If any grass residues are caught in the discharge chute, clean
it using a brush.
Do not remove grass debris in the mower casing or on the
blade by hand or with your feet. Instead use suitable tools
such as a brush or broom.
To ensure that the cut grass can be collected into the hybrid
collection box, the discharge opening and inside the mower
casing must be kept clear of any blockage. Cleaning
Before cleaning, inspecting or repairing your unit, make sure
that the engine has stopped and is cool. Disconnect the spark
plug to prevent accidental starting.
NOTE!
To ensure the best performance of your lawnmower, it is
important to keep it clean.
Always clean your lawnmower immediately after use.
NOTE!
Do not allow grass cuttings and other debris to become dry
and hard on any of the mower surfaces. This will directly
affect the cutting and grass collection performance. Make
sure that the underside of the lawnmower deck is clean and
clear
NOTE!
Never turn the mower upside down.
NOTE!
Before you tip the lawn mower onto its side, completely
empty the fuel tank using a petrol suction pump.
NOTE!
Never clean the lawn mower with a water jet or high-pressure
cleaner. The engine must remain dry. Do not use aggressive
cleaning agents such as cold cleaner or petroleum ether.
1. The lawn mower should be thoroughly cleaned after every
use, especially the underneath and the blade mount. Gently
tip the mower back with the front wheels up in the air. Dirt
and grass is easiest to remove immediately after you have
finished mowing the grass.
2. Check that the grass chute is free of any residual grass.
Remove any such residue.
To Next Page
Loading...
