TROUBLE SHOOTING
Use this section to help you to try and solve any problems you may have:
Fault Possible cause Troubleshooting
Heavy vibration when running
Screws are loose Check screws
Blade fasteners are loose Check blade fasteners
Blade is un- balanced Replace blade.
Engine does not start
Start/stop bar not pressed Press start/stop bar
Spark plug is defec- tive Replace spark plug
Fuel tank is empty Adjust the scarifying depth.
Engine may be flooded Remove plug and dry
Forgot to press the primer Press the primer for 3-5 times.
The scarifying results are
inconsis- tent.
Air filter is soiled Clean the air filter
Spark plug is soiled Clean the spark plug
Uneven mowing results
Blade is blunt Sharpen the blade
Cutting height is too low Set correct height
Unsatisfactory bag- ging of
the grass
Cutting height is too low Set correct height
Blade is worn Replace the blade
Collection box is clogged Empty the grass bag
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE DO NOT ATTEMPT
TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY
AND COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS,
PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE
FOLLOWING PAGE.
To Next Page
