NOTE!
For more information see the Engine Manual.
Blades
For safety reasons you should only ever have your blade
sharpened, balanced and mounted by an authorised service
workshop. For optimum results it is recommended that the
blade should be inspected once a year.
NOTE!
For engine maintenance, see more details in the Engine
Manual.
NOTE!
Before you remove the hybrid collection box, stop the engine
and wait until the blade stops completely.
NOTE!
You will need garden gloves (not provided) and a spanner
wrench to remove the blade.
NOTE!
Always handle the blade with care- sharp edges could cause
injury USE GLOVES.
Renew your metal blade after 50Hrs mowing or 2yrs
whichever is sooner regardless of condition.
NOTE!
If the blade is cracked or damaged replace it with a new one.
NOTE!
Don’t hold the blade by hand directly.
NOTE!
Maintain the sharpness of the blade when cutting grass. If the
blade has worn excessively and become pitted and blunt, it
should be replaced or sharpened. The sharpness of the blade
will affect the performance of the lawnmower.
For safety reasons we recommend that the blade only be
changed by someone qualified and authorised to do so.
1.Tip machine backwards .
2.Hold the blade and unscrew the blade bolt counterclockwise
using a spanner wrench. Remove the washer and the blade.
3.Inspect the blade adaptor on any signs of damage.
4.Fit a new blade, locate the blade on the two studs on the
blade flange and then replace the washer and bolts.
5.Check the washer is still slightly domed to keep the
pressure on the bolt to stop it unwinding, keeping the blade
firmly secure. Then replace the washer (right way around!)
and bolts.
To Next Page
Loading...
