TOORX TRX POWER COMPACT - How to Assemble

1
How to assemble?
STEP 1:
Take the machine and tool set
from the carton and put them
on flat ground.
PARTS LIST: FIG 1
1.Wrench
1PC
2.Silicon oil
1PC
STEP 2:
Hold the MIDDLE part of the
foldable bar with one
hand,and pull it upward as
FIG 2.
Meanwhile,hold the upright
tube with the other hand and
pull it upward as the
arrowhead direction.
FIG 2
STEP 3:
Uplift the handle bars with
both hands.It will be ok when
the sound “Kaka”is
heard.Then turn the switch
button in clockwise direction
and lift up the console in the
correct position.After
finishing,tighten the switch
button.
Assembly is finished.
Note: For advoiding from
injury,please pay attention to
the joint parts.
Upright tube
Foldable bar
Switch button
Handle bar
FIG 1
FIG 3