occurs. To apply, simply lift up the running board and
spray the lubricant onto the running board and the
underneath of the running belt.
MOTOR BELT ADJUSTMENT
All treadmills‟ motor belts have been adjusted before they
are sent out from factory. But it must be adjusted for
second time after building up . Also maybe after a long
time using, the occasion, slipping/ looseness may occur.
User can adjust the motor belt as below:
a. Turn the adjusting screw counter-clockwise with
the wrench.
b. When the motor strap recovers to be
tight/non-slipping, it is OK.
NOTE：Fly wheel should be cleaned regularly.
a. Attach the SAFETY KEY to the console before turning the machine on. Attach the clip to
your clothing at your waist before beginning your workout. If the SAFETY KEY disconnects
during use in case of emergency, the treadmill will slow down and stop. Also, an intermittent
beep will occur and the display will show „--- --- ---„
To Next Page
Loading...
