WARRANTY: Top Flite Models guarantees this kit
to be free from defects in both material and
workmanship at the date of purchase. This
warranty does not cover any component parts
damaged by use or modification. In no case shall
Top Flite’s liability exceed the original cost of the
purchased kit. Further, Top Flite reserves the right
to change or modify this warranty without notice. In
that Top Flite has no control over the final assembly
or material used for final assembly, no liability shall
be assumed nor accepted for any damage
resulting from the use by the user of the final user-
assembled product. By the act of using the user-
assembled product, the user accepts all resulting
liability. If the buyer is not prepared to accept the
liability associated with the use of this product,
the buyer is advised to return this kit
immediately in new and unused condition to
the place of purchase. To make a warranty claim
send the defective part or item to Hobby Services
at the address below.
Hobby Services
3002 N. Apollo Dr. Suite 1
Champaign IL 61822
USA
Include a letter stating your name, return shipping
address, as much contact information as possible
(daytime telephone number, fax number, e-mail
address), a detailed description of the problem and
a photocopy of the purchase receipt. Upon receipt
of the package the problem will be evaluated as
quickly as possible.
Top Flite Models • Champaign, Illinois • Telephone (217) 398-8970 ext. 5 • Fax (217) 398-7721 • productsupport@top-flite.com
READ THROUGH THIS INSTRUCTION BOOK FIRST. IT CONTAINS IMPORTANT INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.
ARO6PO4 V1.0
Entire Contents © Copyright 2004
Wingspan: 81 in [2060mm]
Wing Area: 1089 sq in [70.2 dm
2
]
Weight: 12–14 lb [5440–6350 g]
Wing Loading: 25–30 oz/sq ft [76–92 g/dm
2
]
Fuselage Length: 61.5 in [1560mm]
Radio: 6-channel, 1 high-torque servo, 5-7
standard servos, 1 micro servo (optional)
Engine: .61–.91 cu in [10.0–15.0cc] two-stroke,
.91 cu in [15.0cc] four-stroke
Top Flite Gold Edition Piper Arrow II Assembly Instructions