Top UCA2 - Troubleshooting

14
UCA2
14
4. Open upper base cover plate and then use a soft, dry cloth, or towel to
clean sensor.
7. Troubleshooting
LED flashes
Status Corrective Actions
Green Orange Red
sustained
X X Power on -
X
sustained
X Inhibit -
X flicker X I/O Test Mode -
X X 1 Fast coil set error
Call TOP or agents for
technical support.
X X 2 Second coil set error
Inspect for foreign objects in
coin path and clean.
X X 3 Fish sensor error
X X 4 Drop sersor error
X X 5 Retrun sersor error
X X 6 IR sensor error
X X 7 Program error
Call TOP or agents for
technical support.
X X Fast 2
A Stringing attempt
has been detected.
Inspect for foreign objects in
coin path and clean.
Drop in Sensor
IR Sensor& LED
Return Sensor