18
spinnaker kit (...)
spinnaker halyard
on the front of the hull.
6
To secure one end of the spinnaker halyard, tie to bridle
for time being.
Take other end of spinnaker halyard down mast and through
pulley on back of spinnaker pole running from back of boat
forwards.
Remove the rope that is securing the double block to the
spinnaker pole (this is for shipping purposes only).
1
(1) Feed spinnaker halyard forward and (2) through double
block and then (3) back to double cleat on front crossbeam
aside mast foot.
2
To Next Page
Loading...
