19
spinnaker halyard (...)
Attach ring on shockcord through back/ centre of
centre.
1
Feed spinnaker halyard (4) back along trampoline, through
steel ring.
(8) Feed end of spinnaker halyard through the spinnaker
chute until the tail comes out the front of the chute.
TIP: it is easier to do this by shing the spinnaker halyard out of
the chute with a tiller arm or similar long object.
2
5
Then forward (5) to the guide pulley (6) on trampoline front
(by capsize line pocket).
Then forward (5) to the guide pulley (6) on trampoline front
(by capsize line pocket).
3
4
To Next Page
Loading...
