20
spinnaker sail
To attach spinnaker, tie (T) tack line (attached to spinnaker
1
If you feed the front of the sail through your hands till you
Attach Head of sail to spinnaker halyard (2) coming from the
top of the mast.
The spinnaker has two patches in the centre of the sail,
pass the spinnaker halyard (end from the chute mouth)
onto other patch (4) (one that is cross taped) through the
cross tapes with a bowline.
2
3
You can put sail back into the chute by pulling the spinnaker
halyard from the guide block (5) on the trampoline.
4