21
spinnaker sail (...)
jib
the chute. It should remain poking out of the front of the
chute.
TIP: it is helpful if a second person holds the Clew of the
spinnaker sail at the front of teh chute whilst the rst person pulls
the rest of the sail back into the chute.
Attach spinnaker blocks to eyelets on side of hulls. Ensure
rotation arrows on the block are facing in towards the centre
of the boat.
Feed spinnaker sheets through ratchet blocks and attach to
the Clew of the spinnaker sail.
5
6
Tie jib halyard (H) to top of jib sail onto S hook.
1
Attach plastic hanks to forestay. Pull jib
halyard to raise jib attaching hanks as
you go.
2
To Next Page
Loading...
